Cart 0

DK Label Reusable Cartridge DIY

Assembly Step:

 The reusable cartridge is composed of three components.

 Component A: Side Panel

 Component B: Center Piece

 Component C: Stand




Assembly Step

  1. Put side panel (component A) on the left side of the roll and insert center piece (Component B) into the hole of the panel.


  1. Make sure the tenon on the panel fit into the small hole on the center piece completely.








  1. Put the stand to connect with the center piece.


Disassembly Step

To separate the stand and the center piece by using a ruler or flat blade screwdriver.